Snapper SZ2042, Operator'S Manual

Page: 26 / 72

General
Remove the ignition key to prevent unintentional
movements during lubrication.
When lubricating with an oil can, it must be filled
with engine oil.
When lubricating with grease, unless otherwise
stated, use high grade molybdenum disulphide
grease.
For daily use, the machine must be lubricated
twice weekly.
Wipe away excess grease after lubrication.
It is important to avoid getting lubricant on the
belts or the drive surfaces on the belt pulleys.
If this happens, clean them with spirits. If the
belt continues to slip after cleaning, it must be
replaced. Gasoline or other petroleum products
must not be used to clean belts.
12/12 Every year
1/52 Every Week
1/365 Every day
Lubrication Schedule
IMPORTANT INFORMATION
Use minimal
lubrication and remove excess lubricant so that
is does not come into contact with belts or belt
pulley drive surfaces.
WARNING ! Escaping hydraulic oil under
pressure can have sufficient force to penetrate
the skin, causing serious injury. If injured by
escaping fluid, see a doctor at once. Serious
infection or reaction can develop if proper medical
treatment is not administered immediately.
Lubricate with grease gun
Filter change
Oil change
Level check
26
LUBRICATION