Snapper SNAPPER 84873 301123BV, Parts Manual

Page: 13 / 56

Not
for
Reproduction
Footnotes:
Manual No. 7006278 30" STANDARD DECK
SERIES 23
13
Differential & R.H. Fender
Part No Description Item Qty
1 7090362 13 SCREW, 1/4-20 x 5/8” Hex Washer Head Self-Tap
2 7012296 1 BEARING, Axle (R. H. Fender)
3 7010969 1 NUT, 5/16-24 Flange Lock (Large)
4 7031079 1 WASHER, Thrust
5 7038067 1 PLATE, Differential
6 7022115 4 SPACER, Pinion
7 7021127 4 GEAR, Differential Pinion (12T 12P)
8 7011072 1 WASHER, Thrust
9 7051584 1 * ASSEMBLY, Drive Hex Tube
10 7010988 1 WASHER, Nylon
11 7200128 1 GEAR, 11 Tooth, 10 Pitch
12 7010941 1 CHAIN, 46 Pitch (#35 Endless)
13 7021129 1 SPROCKET, 34T, 3/8P
14 7010965 1 RING, 1-3/16” External Retaining
15 7021128 1 SPACER, Differential Case
16 7012332 2 CLAMP, 2” ID
17 7075115 1 BOOT, Rear Axle, Thick Flange
18 7011024 1 PLUG, 1/2” Cup Insert
19 7037279 1 CASE, Transmission
20 7028762 1 GASKET, Transmission Case
21 7037280 1 FENDER, Right Hand (1.62” Dia. Hole)
22 7021158 1 GEAR, 63 Tooth 10 Pitch
23 7075479 1 ASSEMBLY, Long Axle (Includes 23T Gear)
24 7074431 1 SPACER, Differential Case
25 7057398 1 ASSEMBLY, Short Axle (Includes 23T Gear)
26 7012333 4 BOLT, 5/16-24 x 1-5/8” Hex Special Lock (Vibresist)
27 7011156 2 5/16” O-RING
28 7011782 2 WASHER, 5/16” Belleville
29 7090395 1 WASHER, 5/16” External Tooth Lock
30 7090188 1 WASHER, 34 x .69 x .08 Flat
31 7011042 1 SCREW, 5/16-24 x 2-5/8” Hex Head Cap
32 7090361 11 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
35 7061017 GREASE, “00" Transmission (24 oz. Required)
-- 7060411 1 KIT, Differential (4 Pinion) (Not Shown)
-- 7060662 1 KIT, Differential (8 Pinion w/DX Bearing) (Not Shown)
-- 7060412 1 KIT, Long & Short Axle (Includes items 23, 24 & 25) (Not Shown)
NOTE: * Assembly includes two bearings inside hex tube (p/n 7015140, not shown) & one nylon washer (p/n 7010988,
item 10).