Snapper R5002B, Parts Manual

Page: 19 / 54

Frame (8HP), Traction Drive
Footnotes:
TP 400-5202-5-RT-N
Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
SERIES 2
19
Part No Description Item Qty Note
1 7049751 BAR, Stand-Up Was 49705
2 7035020 FRAME, Right Side
3 7091084 9 SCREW, 1/4-20 x 3/8" Self-Tapping Was 90302
4 7011035 2 BOLT, 5/16-24 x 1 5/8" Tapered
5 7040434 2 HUB, Wheel
6 7092062 2 NUT, 5/16-24 Special Hex Lock Was 11201
7 7010838 GRIP
8 7014658 CAP, Seal L.H. 3/4" Was 10967 (Now 14658 +
14662 + 12332)
9 7090189 4 WASHER, 5/16 Internal/External Tooth Lock
10 ASSEMBLY, Shift Quadrant (See "Shift Quadrant" Group)
11 7091575 NUT, 5/16-18 Hex Lock Was 90184
12 7011037 4 CLAMP, 1-7/8"
13 7010989 BEARING, Axle Was 70295
14 7011071 WASHER, Thrust (Nylon)
15 7014673 WASHER, Thrust
16 7075115 SEAL, Long Was 18570
17 ASSEMBLY, Idler Bracket (See "Idler Bracket Assembly"
Group)
18 7014208 PULLEY, V-Idler 2.62" OD
19 7090122 WASHER, 3/8" Flat
20 7090118 WASHER, 3/8 Split Lock
21 7091497 SCREW, 3/8-16 x 1 1/2" Hex Head Cap Was 90655
22 7090700 4 BOLT, 5/16-18 x 1 1/2" Hex Head Cap (Engine Mounting)
23 7011791 RETAINER, Bolt 5/16"
24 7035102 FRAME
25 7091297 5 NUT, 5/16-24 Hex Was 90223
26 7091841 2 SCREW, 5/16-18 x 1" Self-Tapping Was 90369
27 * CLIP, Cable (Not Available) Was 32274
28 7090187 6 WASHER, 5/16 Split Lock
29 21873 ROD (Not Available) Was 21873
30 32273 * CLIP, Control (Not Available) Was 32273
31 7040490 CLEVIS PIN, 3/4 X 6-1/16, ZP (Hitch)
32 7011714 PIN, Hair
33 7051379 ASSEMBLY, Primary Chain Case (See "Primary Chain Case"
Illustration & Parts List)
34 7014337 LINK, Short Shift
35 7038065 CLEVIS
36 * SPRING (Not Available) Was 14371
* NOTE: This part may be available from DPNI 1-800-558-1848 (Todd Graff)