Snapper Out Front Z-rider Mower Operator'S Manual Download Page 9

 

 

2 YEAR LIMITED WARRANTY 

 

For two (2) years from purchase date for the original purchaser's use, SNAPPER, through any authorized 
SNAPPER dealer will replace, free of charge (except for taxes where applicable), any part or parts found upon 
examination by the factory at McDonough, Georgia, to be defective in material or workmanship or both. 
 
SNAPPER
 FIELD SERVICEABLE SPINDLES and their components used on SNAPPER PRO

®

 Mid Size walks 

and SNAPPERZRIDER

®

 ride on commercial equipment have a three (3) year limited warranty against defects 

in material or workmanship or both. 
 
All transportation costs incurred by the purchaser in submitting material to an authorized SNAPPER dealer for 
replacement under this warranty must be paid by the purchaser. 
 
This warranty does not apply to engines and their components, and batteries, as these items are warranted 
separately. This warranty does not apply to parts that have been damaged by accident, alteration, abuse, 
improper lubrication, normal wear, or other cause beyond the control of SNAPPER. This warranty does not 
cover any machine or component that has been altered or modified, changing safety, performance, or durability. 
 
Batteries have a one (1) year prorated warranty period with free replacement if required during the first ninety 
(90) days from the original purchase date. SNAPPER will not be responsible for any installation cost incurred. 
The battery warranty only covers original equipment batteries and does not cover damage to the battery or 
machine caused by neglect or abuse, destruction by fire, explosion, freezing, overcharging, improper 
maintenance, or use of improper electrolyte. 
 
There is no other express warranty. 
 

DISCLAIMER OF WARRANTY 

Implied warranties, including those of merchantability and fitness for a particular purpose, are limited to 
two (2) years from purchase date for the original purchaser's use, and up to the extent permitted by law 
and all implied warranties are excluded. This is the exclusive remedy. Liabilities for consequential 
damages, under any and all warranties are excluded. 
 
Some states do not allow limitations on how long an implied warranty lasts, or do not allow the 
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion 
may not apply to you. 
 
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 
 

WARNING:

 THE USE OF REPLACEMENT PARTS OTHER THAN GENUINE SNAPPER PARTS MAY 

IMPAIR THE SAFETY OF SNAPPER PRODUCTS AND WILL VOID ANY LIABILITY AND WARRANTY BY 
SNAPPER ASSOCIATED WITH THE USE OF SUCH PARTS.
 
 
IMPORTANT: Please fill out the attached SNAPPER Product Registration Card immediately and mail to: 

Snapper’s Product Registration Center, P.O. Box 1379, McDonough, Georgia. 30253 

 
 

 

 
 
 

COPYRIGHT © 2001 
SNAPPER INC. 
ALL RIGHTS RESERVED 

MANUAL NO. 7-3720 (Rev. 1, 7/25/01) 

Summary of Contents for Out Front Z-rider Mower










Reviews: