Snapper MP216518B, MRP216518B, Safety Instructions & Operator'S Manual, Page: 23 / 32

23
SERVICE SCHEDULE
ITEM SERVICE PERFORMED REF. EACH
USE
5
HRS
25
HRS
50
HRS
100
HRS
EACH
SEASON
Engine Oil Check Oil Level Page 7 X
Initial Oil Change Page 12 X
Periodic Oil Change Page 13
X*
Air Pre-Cleaner Clean Sponge Element Engine Manual X**
Air Cleaner Clean or Replace Engine Manual X**
Spark Plug
Replace Engine Manual
X
Engine Cooling
System
Clean Shroud & Fins Engine Manual X**
Drive Belts Check For Wear And
Tension Pages 13, 19 X X X
Mower Blade Check For Wear, Damage
& Replacement Pages 14-15 X
Mower Deck Clean Debris
Accumulation Page 7 X
Transmission
Grease
Check Grease Level Page 13
X X
Periodic Grease Check Page 13
X
Drive Disc Check for Wear Damage
& Replacement Pages 16-18 X
* Change oil every 25 hours when operating under heavy load or high temperatures.
** Clean more often under dusty conditions or when air debris is present
4.5 MAINTENANCE/REPLACEMENT PARTS
MAINTENANCE PARTS
Blade Control Cable 3-4608
Clutch Pull Cable (See Parts Manual) 3-4604
Cutter Blade (Air Lift Compatible) 1-9795
Cutter Blade (Mulching) 1-7168
Cutter Blade (Not Air Lift Compatible) 2-6691
Cutter Blade (Ninja - Quad Edge) 2-6407
Wheel Drive Pulley to Transmission Pulley Belt 1-2354
Engine to Drive Disc Belt 4-6784
Cantilever Drive Tire Assembly 5-7668
Rubber Drive Tire 4-1855
Parts Manual for 21” Steel Deck Walk Behind Mower Type ‘M’ Series 18 06138