background image

1/2006

1

TP 300-4517-00-RG-SMAN

Setup
& Adjustment Instructions

LT-200 Series Tractors and Mowers

TABLE OF CONTENTS:

SAFETY RULES .................................................................2

SETUP PROCEDURES

Quick Setup List ................................................................3
Uncrating ............................................................................4
Battery Charging & Installation ........................................4
Check Fluid levels .............................................................5

Check Transmission Oil Level .........................................5
Fill and Check Engine Oil.................................................5

Perform Safety Checks .....................................................6

Functional Tests...............................................................6
Mower Blade Stopping Check..........................................6
Seat Switch Connection ...................................................6
Safety Interlock System ...................................................6

Torque Mower Blades .......................................................7
Burnishing the Electric PTO Clutch.................................7
Reduce and Check Tire Pressure ....................................7
Lubrication .........................................................................8
Hourmeter ........................................................................11
Mower Adjustments & Assembly ...................................10

Mower Deck Removal & Installation ..............................10
Side-to-Side Leveling .....................................................11
Front-to-Back Leveling ...................................................11

ADJUSTMENT PROCEDURES

Adjust Gauge Wheels......................................................12
Seat Slide Adjustment.....................................................12
Electric PTO Clutch Adjustment ....................................13

SERVICE PROCEDURES

Mower Belt Replacement ................................................14

Attention Setup Personal:

Sections and items denoted by the 

Setup 

symbol

provide the information necessary to fully assemble,
test, and prepare the units described above for
delivery to your customers.

Additional information concerning functional tests,
general adjustment procedures, and the location of
normal lubrication points are included in these
instructions.

The safety warnings provided in this guide and in
the operator's manual included with the unit contain
important information that must be obeyed when
assembling, setting-up, operating, servicing,

transporting, or storing the unit.
These warnings are highlighted by the safety alert triangle
symbol shown above, which signifies that an important safety
message is being provided.   

You must read, understand, and follow these warnings and
instructions, and use safe shop and work practices at all
times while working on or around this unit and all other
outdoor power equipment.

Mfg. No. Description

Tractors & Mower Combinations

2690437

LT-200, 20HP & 44” Mower Deck

Form No. 1734713-00

Summary of Contents for LT-200 2690437















Reviews: