Snapper FRP216016, Safety Instructions & Operator'S Manual

Page: 19 / 28

19
SERVICE SCHEDULE
ITEM SERVICE PERFORMED REF. EACH
USE
5
HRS
25
HRS
50
HRS
100
HRS
EACH
SEASON
Engine Oil Check Oil Level Page 6 X
Initial Oil Change Page 9
X
Periodic Oil Change Page 10
X*
Air Pre-Cleaner
Clean Sponge Element Engine Manual
& Page 10.
X**
Air Cleaner
Clean or Replace Engine Manual.
X**
Spark Plug
Replace Engine Manual.
X
Engine Cooling
System
Clean Shroud & Fins Engine Manual X**
Drive Belts Check For Wear And
Tension Page 16-17 X X X
Mower Blade
Check For Wear, Damage
& Replacement Page 12
X
Mower Deck Clean Debris
Accumulation Page 10 X
Transmission
Grease
Check Grease Level Pages 9
X X
Periodic Grease Check Pages 10
X
Drive Disc Check for Wear Damage
& Replacement Page 12-15 X
*Change oil every 25 hours when operating under heavy load or high temperatures.
**Clean more often under dusty conditions or when air debris is present
4.5. MAINTENANCE/REPLACEMENT PARTS
MAINTENANCE PARTS
Engine Speed Control (Briggs Engines) 2-9036
Engine Speed Control (Tecumseh 4 Cycle Engine) 2-9052
Engine Speed Control (Tecumseh 2 Cycle Engine) 2-4139
Blade Control Cable (See Parts Manual) --
Clutch Pull Cable (See Parts Manual) --
Cutter Blade (European Models Only) 1-9795
Cutter Blade (Mulching) 1-7168
Cutter Blade (Not Air Lift Compatible) 2-6691
Cutter Blade (Ninja - Quad Edge) 2-6407
Wheel Drive Pulley to Transmission Pulley Belt 1-2354
Engine to Drive Disc Belt 1-2353
Rubber Drive Tire 2-3364
Parts Manual for 21” Steel Deck Walk Behind Mower
Series 12, 14, 15 & 16 06059