background image

 

29 

Section 4 - ADJUSTMENTS & REPAIR 

 
4.6.6. BATTERY TESTING 

 

Battery Condition Chart 

State of Charge 

Syringe Hydrometer 

Digital Voltmeter 

Five Ball Hydrometer 

100% Charged w/ Sulfate Stop 

1.280 

12.80v 

Five Balls Floating 

100% Charged 

1.265 

12.60v 

Four Balls Floating 

75% Charged 

1.210 

12.40v 

Three Balls Floating 

50% Charged 

1.160 

12.10v 

Two Balls Floating 

25% Charged 

1.120 

11.90v 

One Ball Floating 

0% Charged 

Less than 1.100 

Less than 11.80v 

Zero Balls Floating 

 
 

 
 

 

SNAPPER REAR ENGINE RIDER ACCESSORIES 

 

 

PART NO. 

DESCRIPTION OF KIT 

MODELS USED ON 

 
6-0517 ................................ Wheel Weight (8” Wheels) ............................... All Rear Engine Riders 
6-0601 ................................ Smooth Start Clutch.......................................... All Rear Engine Riders 
6-0697 ................................ Dump Cart......................................................... All Rear Engine Riders 
6-1400 ................................ Gauge Wheel.................................................... All 33” Deck Rear Engine Riders 
 
6-0794 ................................ Gauge Wheel.................................................... All 41” & 42” Deck Rear Engine Riders 
6-0941 ................................ Single Bag Catcher ........................................... All 25” Deck Rear Engine Riders 
6-0942 ................................ Single Bag Catcher ........................................... All 26” & 30” Deck Rear Engine Riders 
6-0943 ................................ Single Bag Catcher ........................................... All 28” & 33” Deck Rear Engine Riders 
 
6-0944 ................................ Single Bag Catcher ........................................... All 41” & 42” Deck Rear Engine Riders 
6-0945 ................................ Twin Bag Catcher ............................................. All 41” & 42” Deck Rear Engine Riders 
6-0946 ................................ Twin Bag Catcher ............................................. All 28” & 33” Deck Rear Engine Riders 
6-0947 ................................ Bag-N-Wagon ................................................... All 28” & 33” Deck Rear Engine Riders 
 
6-0948 ................................ Thatcherizer ...................................................... All Series 7 & Newer Riders 
6-0964 ................................ Wagon Cover .................................................... All 28” & 33” Deck Rear Engine Riders 
6-1190 ................................ Weight (Front)................................................... All Series 7 & Newer Riders 
6-0959 ................................ Dozer Blade (36” Blade).................................... All Rear Engine Riders 
 
6-0357 ................................ Tire Chains (Tires-16 x 6.50-8)......................... All Rear Engine Riders 
6-0358 ................................ Tire Chains (Tires-16 x 4.80-8)......................... All Rear Engine Riders 
6-1823 ................................ Ninja Recycling (Cover) .................................... All 25” Deck Rear Engine Riders 
6-1049 ................................ Recycling (Cover).............................................. All 25” Deck Rear Engine Riders 
 
6-1253 ................................ Ninja Recycling (Cover) .................................... All 28” Deck Rear Engine Riders 
6-1254 ................................ Ninja Recycling (Cover) .................................... All 30” Deck Rear Engine Riders 
6-1255 ................................ Ninja Recycling (Cover) .................................... All 33” Deck Rear Engine Riders 
6-1220 ................................ Ninja Recycling (Cover) .................................... All 41” & 42” Deck Rear Engine Riders   
 
6-1910 ................................ Utility Trailer 
6-1911 ................................ Aerator 
6-1912 ................................ Dethatcher 
6-1913 ................................ Lawn Sweeper 
 
6-1914 ................................ Dethatcher Kit 
6-1915 ................................ Lawn Roller 
6-1916 ................................ Broadcast Spreader 

 

Summary of Contents for EM250821BE, EM281021BE






































Reviews: