5
Section 1 - FAMILIARIZATION
FIGURE 1.1
1.1 INTRODUCTION
This manual has been prepared for the operator’s of the
SNAPPER Rear Engine Rider. Its purpose, aside from
recommending standard operating procedures and
routine service requirements, is to promote SAFETY
through the use of accepted operating practices. Read,
Understand and Follow the IMPORTANT SAFETY
INSTRUCTIONS on Pages 2 and 3 of this manual and
All SAFETY messages on the Rear Engine Rider and its
attachments before operating.
1.2 NOMENCLATURE
The nomenclature drawing above, Figure 1.1, shows the
essential parts of the SNAPPER Rear Engine Rider. It is
recommended that all operator’s of this equipment
become thoroughly familiar with the controls,
components, and operation of this machine before
operating. Specific details involving the engine are found
in the separate engine owner’s manual. Study these
manuals before operating and keep both handy for future
reference.
OPERATOR’S SEAT
STEERING
WHEEL
IGNITION
SWITCH
ENGINE
SPEED
CONTROL
PARK
BRAKE
LEVER
CONTROL PANEL
FUEL TANK
VENT
FUEL
FILLER CAP
CONTROL PANEL
(See Inset)
CLUTCH/BRAKE
PEDAL
BLADE PEDALS
REAR
BUMPER
TRANSMISSION
SHIFT LEVER
DECK LIFT
LEVER
DISCHARGE
DEFLECTOR
MOWER DECK
BLADE LEVER
MOWER DRIVE
BELT
OVERRIDE
LEVER
