Not for
Reproduction
22
Specifications
Power Ratings
The gross power rating for individual gasoline engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 Small Engine Power & Torque Rating Procedure, and is rated in accordance with SAE J1995.
Torque values are derived at 2600 RPM for those engines with “rpm” called out on the label and 3060 RPM for all others;
horsepower values are derived at 3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.
COM. Net power values are taken with exhaust and air cleaner installed whereas gross power values are collected without
these attachments. Actual gross engine power will be higher than net engine power and is affected by, among other things,
ambient operating conditions and engine-to-engine variability. Given the wide array of products on which engines are
placed, the gasoline engine may not develop the rated gross power when used in a given piece of power equipment. This
difference is due to a variety of factors including, but not limited to, the variety of engine components (air cleaner, exhaust,
charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity,
altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute
an engine of higher rated power for this engine.
See an authorized dealer.
Parts and Accessories
ENGINE
Model INTEK
TM
4175 Series
TM
Single Cylinder
Displacement
30,51 cu in. (500 cc)
Model INTEK
TM
7220 Series
TM
Twin Cylinder
Displacement
32,95 cu in. (656 cc)
Electrical System
Alternator: 9 amp Regulated
Battery: 12V-195 CCA
Oil Capacity
48 oz (1,4 L) Single Cylinder
64 oz (1,9 L) Twin Cylinder
Engine Oil
Synthetic 5W30
Spark Plug Gap
0.030 in. (0,76 mm)
Spark Plug Torque
180 in-lbs (20 Nm)
Fuel Tank Capacity
3.5 gal (13,2 L)
* This spark ignition system complies with Canadian ICES-002.
