background image

3000 PSI Pressure Washer

6

KNOW YOUR  PRESSURE WASHER

Read this Operator’s Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.

Chemical Injection

Siphon/Filter

Spray Gun

Nozzle Extension with

Quick Connect

Throttle Lever

Choke Lever

Fuel Valve

Recoil Starter

(on front of engine)

Air Filter

Fuel Tank

Pump equipped with
Automatic Cool Down System

Water Inlet

Oil Fill Cap

Spray Tips

High Pressure Outlet

Accessory Tray  —  Provides convenient storage for
standard and optional accessories, such as brushes, turbo
wands, ect.

Air Filter — Protects engine by filtering dust and debris out
of intake air.

Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F.Warm water will
discharge from pump onto ground.This system prevents
internal pump damage.

Chemical Injection Siphon/Filter — Use to siphon
detergent or other pressure washer chemicals into the low
pressure stream.

Choke Lever — Prepares a cold engine for starting.

Data Tag — Provides model, revision and serial number of
pressure washer. Please have these readily available if calling
for assistance.

Fuel Tank — Fill tank with regular unleaded fuel. Always leave
room for fuel expansion.

Fuel Valve  —  Used to turn fuel on and off to engine.

High Pressure Hose — Connect one end to the water
pump and the other end to the spray gun.

High Pressure Outlet — To connect high pressure hose.

Nozzle Extension with Quick Connect — Allows you to
switch between four different spray tips.

Oil Fill Cap — Fill engine with oil here.

Pump — Develops high pressure.

Recoil Starter — Use for starting the engine manually.

Safety Goggles (not shown) — Always use the enclosed
goggles or other eye protection when running your
pressure washer.

Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.

Spray Tips — Chemical injection, 0°, 15°, and 40°: for various
high pressure cleaning applications.

Throttle Lever—Sets engine in starting mode for recoil
starter and stops a running engine.

Water Inlet — Connect garden hose here.

Accessory Tray

Data Tag

High Pressure Hose

Summary of Contents for 020231-2









































Reviews: