SnapNrack Array Skirt Installation Manual Download Page 3

Page: 3 / 4

Finalize placement of skirt mount and torque hardware to 5 - 6 lb - ft.

INSTALL NOTE: Torque to 3 - 4 lb - ft when installing on short side of Kyocera modules.

Determine length(s) of array skirt needed for array(s).

Installation Instructions

snapnrack.com

Solar Mounting Solutions





If array skirt needs to be cut, it can be done prior to installation at ground level or on the roof after

installation.

6A.

If cutting skirts prior to installation, a circular saw with an appropriate metal-cutting blade is

recommended.

6B.

If cutting skirts after installation, a portable band saw is recommended.

Summary of Contents for Array Skirt

Page 1: ...ardware Description Torque Speci cation Array Skirt Frame Mount 5 6 lb ft 60 72 lb in 3 4 lb ft 36 48 lb in Kyocera short side Technical Speci cations Dimensions 162 Skirt Length Material Skirt and Sp...

Page 2: ...f skirt mount ensuring that shorter end of extrusion is facing up Required Tools Socket Wrench Torque Wrench 1 2 Socket Circular Saw or Portable Band Saw Tape Measure 1 Locate array skirt mounts using...

Page 3: ...for array s Installation Instructions 6A 6B snapnrack com Solar Mounting Solutions 3 6 If array skirt needs to be cut it can be done prior to installation at ground level or on the roof after install...

Page 4: ...tions 7 Rest array skirt on top hook of skirt mounts then push lower hook up and lock into bottom of array skirt Installation Instructions 4 8 If a splice is required install by pushing it equally int...