5
2
Assembly
This guide takes Snapmaker 2.0 A350 as a demonstration. All steps
demonstrated apply to the assembly and use of the CAN Hub on A150 and
A250. Turn off the machine before assembly.
Insert the Sliding Nuts into the 48CA Beam on the right of the Enclosure.
1
If you are using the A150 Enclosure, you can insert the Sliding Nuts into the 48CA Beam on the left of the
Enclosure.
If you have already installed the Emergency Stop Button, you need to disassemble it before assembling the
CAN Hub. When mounting the hub, ensure there is enough space for the installation of the Emergency Stop
Button.
Sliding Nut
×
4
