Quick Start Guide
|
55
Filament Runout Recovery & Power-Loss Recovery
Your printer supports filament runout recovery and power-loss recovery, so there is no need to worry about
resuming printing anymore! When the filament runs out, tap
Ready to Load
and load new filament to resume
printing. In case of power-loss, tap
Recover
to resume printing after the power has been restored.
Firmware Update
It is recommended to update the firmware to the most up-to-date version via Wi-Fi or USB flash drive.
: Turn on the machine > Connect your machine to a Wi-Fi network > Swipe left on the Touchscreen > Tap
Settings
>
Firmware Update
>
Check for Updates
>
Update Now
>
Complete
.
: Download our firmware from
https://snapmaker.com/product/snapmaker-2/downloads
> Insert the USB
flash drive into the Controller > Turn on the machine > Swipe left on the Touchscreen > Tap
Files
> Tap
USB
>
Tap the firmware file to update.
Summary of Contents for 80016
