Tip:
When the Top Tether and Top
Tether fix hook are not in use, they can
be rolled up and put on the Top Tether fix
hook on the rear cover (as shown).
Tip:
The Top Tether
14
should go
through the bottom of the vehicle
seat headrest. (If the vehicle seat
headrest cannot be adjusted, then go
Tip:
Before removing the cover, release the button
P
and elastic
Q
first.
Tip:
Use the plastic piece
R
to fit the cover.
Remember install the elastic
Q
and buttons
P
.
Note!
Check whether the
hook of the top tether
and anchor is secure.
1. Press the button of back cover
M
, take
the Top Tether
14
and Top Tether fix
hook
15
out and close the back cover
16
.
1. Adjust the child car seat to the most upright position, adjust the headrest to the
highest position.
2. Release the buckle, take the inner cushion out, remove the shoulder pad and buckle
pad.
3. Remove the headrest pad and body pad carefully.
4. Fix the Top Tether fix hook
15
on the anchor of the
vehicle seat according to the vehicle seat user manual,
then pull the Top Tether
14
until the indicator shows
green.
1. Adjust the car seat to the most upright
position and adjust the headrest to the highest
position.
2. Refit the headrest cover and body cover
carefully.
3. Install the shoulder pad and buckle pad.
2. Put the car seat towards the
driving direction on the vehicle seat.
3. Press the button
N
to adjust the
Top Tether.
4-7 How to install Top Tether
4-8 How to remove and fit on seat cover
Removing seat cover
Fitting on seat cover
Caution:
Do not use luggage hook to replace the
one on the Top Tether. Check the vehicle to find
the sign.
M
16
14
15
14
15
N
15
14
15
16
Q
P
R
