SNAP Networks Private Limited.
Learning Procedure:
Step 1:
Make sure all 5 s
Step 2:
Make sure there is no loud noise
Step 3:
Switch off any fans or a
Step 4:
Be prepared for loud tones (Sw
speakers in 2 or 3 rounds
Step 5:
Press and h
status LED (Right side corner LED)
Step 6:
Step aside s
between any speaker and the m
Step 7:
Make sure you can see the front of t
Step 8:
Maintain silence
stops blinking.
Step 9:
You will hear set of r
all speakers and the s
Learning Procedure:
Make sure all 5 speakers and subwoofer are powered ON.
Make sure there is no loud noise in the room.
Switch off any fans or air conditioners.
Be prepared for loud tones (Sweep) that will come out of the
in 2 or 3 rounds.
Press and hold the “learn” button on the remote control
(Right side corner LED) starts blinking Orange
Step aside such that you are not standing in
between any speaker and the microphone.
sure you can see the front of transmitter.
Maintain silence until the orange status LED
You will hear set of rapid tones (sweeps) from
the subwoofer one after the other.
powered ON.
eep) that will come out of the
emote control till
starts blinking Orange.
