manualshive.com logo in svg

Snap-On Zeus, User Manual

Introducing RTS Zeus, a cutting-edge real-time strategy game that guarantees hours of immersive gameplay. Delve into its detailed world and epic battles, while mastering intricate strategies and tactical decision-making. Access the comprehensive Specification Sheet and free manual, available for download exclusively at manualshive.com. Unleash your inner commander and conquer!

Share
Download
background image

ShopStream Update Tool (SST)

Installing Software Updates

200

For SST program updates (only) - if you have the Automatic Update setting 
”on”, the update will be installed automatically. See Automatic Update setting 
in 

Basic Operation

 on page 197

 for additional information.

If you have the Automatic Update setting “off”, the SST program must be 
manually installed. See 

Installing Software Updates

 on page 200

.

NOTE

If the Internet connection is interrupted during a download, the download is 
suspended and a “network unavailable” message displays. The message 
disappears and the download resumes automatically once the Internet 
connection is restored.

16.6  Installing Software Updates

When a software update is ready for installation, an installation update message will 
appear (

Figure 16-8

). You can select the message or the SST icon from the system 

tray at anytime to start the software update installation process. 

Figure 16-8 

Typical update installation message

NOTE

If applicable, before installing a software update, have your Compact Scan 
Module (CSM) and USB cable available. The software update may include 
CSM firmware updates that need to be installed. 

z 

To install a software update:

1.

Select the software update available message (

Figure 16-8

), or the SST icon 

from the system tray.

A software update installation window will display (

Figure 16-9

).

Figure 16-9 

Typical update installation window

2.

Select an installation option to continue:

–

Install Now

—starts the software update installation. Proceed to step 3.

–

Install Later

—closes the message. The message will reappear at a later 

time as a reminder. 

NOTE

If Install Later is chosen, you can select the SST icon from the system tray to 
restart the installation at anytime.

3.

Close the 

ShopStream Diagnostic Suite

 application. The ShopStream 

Diagnostic Suite should remain closed until the software installation has 
completed.

4.

Follow the on-screen instructions to complete the installation.

5.

After the installation is complete, open the 

ShopStream Diagnostic Suite 

application.

6.

If applicable, select 

Scanner

 from the Home Screen. If a CSM firmware 

update has been received, a “Compact Scan Module firmware update” message 
will display. Proceed to 

Firmware Updates

 on page 39

. 

xx.x

xx.x

Summary of Contents for Zeus












































































































































































































































Reviews:

No comments

Related manuals for Zeus

Zempire EVO Series Pitching Instructions preview
EVO Series
Brand: Zempire Pages: 2
Calivita BioHarmonex BH4 Product Information & User Manual preview
BioHarmonex BH4
Brand: Calivita Pages: 38
CAIRE FreeStyle Manual preview
FreeStyle
Brand: CAIRE Pages: 91
Eaton Crouse-hinds series Technical Manual preview
Crouse-hinds series
Brand: Eaton Pages: 32
Eaton VoCALL 5 Quick Start Manual preview
VoCALL 5
Brand: Eaton Pages: 2
Eaton VoCALL 5 Installation And Operation Manual preview
VoCALL 5
Brand: Eaton Pages: 20
Hakko Electronics 192 Instruction Manual preview
192
Brand: Hakko Electronics Pages: 8
Hainbuch TESTit Installation Manual preview
TESTit
Brand: Hainbuch Pages: 52
LANGER EMV-Technik P1401 User Manual preview
P1401
Brand: LANGER EMV-Technik Pages: 25
Lang Electric Clamshell CSE12-208VCD Installation, Operation And Maintenance Instructions preview
Electric Clamshell CSE12-208VCD
Brand: Lang Pages: 16
Vari Lite BeamLine VL800 User Manual preview
BeamLine VL800
Brand: Vari Lite Pages: 14
Vaniman VANGUARD 1X Quick Start Manual preview
VANGUARD 1X
Brand: Vaniman Pages: 3
Additel 226 User Manual preview
226
Brand: Additel Pages: 107
Y.I.C. TECHNOLOGIES EMScannerR Setup Manual preview
EMScannerR
Brand: Y.I.C. TECHNOLOGIES Pages: 6
W&H Implantmed SI-1010 Quick Manual preview
Implantmed SI-1010
Brand: W&H Pages: 2
Nady Audio MP-FE2 Owner'S Manual preview
MP-FE2
Brand: Nady Audio Pages: 2
Erbe VIO 3 Manual preview
VIO 3
Brand: Erbe Pages: 124
helena BioSciences SAS-1 Immunofix Instructions For Use Manual preview
SAS-1 Immunofix
Brand: helena BioSciences Pages: 48

Brands by name

Popular brands

Load more brands