26
Scanner Operations
Basic Operation and Navigation
Properties
The
Properties
icon on the Scanner Toolbar is used to configure certain characteristics of the
parameter graph display. Selecting opens a Properties dialog box that allows you to adjust colors,
settings, and sweep (
).
Figure 4-5
Sample properties dialog box
Selecting either color option,
Edit Plot Color
or
Edit Background Color
, opens a standard color
selection dialog box. Select a color, then select
OK
to close the dialog box.
The Show Grid icon is used to switch a background grid pattern on the data graphs on and off:
•
To switch the grid on; select to highlight
Show Grid
, then select
Accept
.
•
To switch the grid off; select
Show Grid
twice so it is not highlighted, then select
Accept
.
The Samples After Trigger setting determines how many data samples are recorded following a
triggering event. The highlighted samples icon indicates the number of frames that are included in
the recording after a triggering event.
The sweep options let you choose the amount of data that displays across the graph. Values are
in sample points, or frames of data. A frame of data equals one complete transmission of the serial
data by the electronic control module.
Summary of Contents for VERUS
Page 1: ...User Manual EAZ0061B58A Rev E ...
Page 4: ...iv ...
