173
Chapter 16
Maintenance
This section covers how to care for your diagnostic tool.
16.1 Cleaning the Touch Screen
The touch screen can be cleaned with a soft cloth and alcohol or a mild window cleaner.
IMPORTANT:
Do not use any abrasive cleansers or automotive chemicals on the touch screen.
16.2 Calibrating the Touch Screen
The sensitivity and accuracy of the touch screen should be calibrated before you begin using your
diagnostic tool. Adjustments can be made to the touch screen calibration to maintain your
personal settings. The touch screen can also be set to recognize the stylus being held in place for
five seconds as a right-click of a mouse. Both procedures are explained below.
z
To calibrate the touch screen:
1. From the Windows toolbar select
Start
>
All Programs
>
Hampshire TSHARC Control
Panel
to open the touch screen dialog box (Figure 16-1).
Figure 16-1
Sample Hampshire TSHARC Control Panel window
2. Select the
Calibration
tab.
3. Select
Configure
to open the Calibration Options dialog box.
4. Check
20%
in the Offset field on the right-hand side of the dialog box,
scroll
down and select
20 Point Calibration
on the left-hand side of the screen.
Summary of Contents for VERUS
Page 1: ...User Manual EAZ0061B58A Rev E ...
Page 4: ...iv ...
