100
Scope Multimeter
Operations
Trace Controls
The Traces controls are used to adjust individual characteristics of how the signal is sampled and
displayed for each of the four traces.
z
To adjust trace controls:
1. Select
Setup
from the Scope Multimeter toolbar.
The Scope Multimeter Preferences dialog box opens.
2. Select
Traces
to open the submenu.
3. Select the tab for the trace to be configured from the submenu
The traces dialog box displays (
).
1— Trace tabs
2— Trace Probe icon
3— Trace Scale icon
4— Trace characteristics check boxes
5— Baseline position
6— Auto Find icon
7— Back icon
8— Exit icon
Figure 8-14
Traces dialog box
4. Select the
Trace Probe
icon to open the menu.
5. Highlight a probe on the list and select
OK
to close the window.
6. Select the
Trace Scale
icon to adjust the vertical scale, of the display.
A dropdown menu opens, menu options vary depending upon which test lead is selected.
7. Select a trace scale option, then close the window.
8. Select or deselect the trace characteristic items as needed:
–
Displayed
—this trace is on screen when checked, and not visible when not checked.
–
Inverted
—signal polarity is reversed when checked, normal when not checked.
Summary of Contents for VERUS
Page 1: ...User Manual EAZ0061B58A Rev E ...
Page 4: ...iv ...
