manualshive.com logo in svg

Snap-On VERUS edge, User Manual

The Snap-On VERUS Edge is an advanced automotive diagnostic tool that empowers mechanics with its cutting-edge features. Maximize your efficiency and performance with the accompanying User Manual - available for free download on our website. Explore its comprehensive instructions and unleash the true potential of the VERUS Edge!

Share
Download
background image

169

System Settings Operations

Paired Devices

14.1.4 Paring the M2 Scope/Meter (Optional Equipment)

NOTE:

i

The M2 Scope/Meter is optional equipment for some diagnostic tools and may not be included 
with your diagnostic tool kit. For detailed operation instructions, see the M2 Scope/Meter 
instructions supplied with your M2 and/or diagnostic tool. M2 operation instructions can also be 
found on our website, see the Contact Information section in the front of this manual for website 
address information.

Pairing is the wireless connection (identification) process used to connect the M2 Scope/Meter to 
your diagnostic tool. The M2 Scope/Meter needs to be paired (connected) to the diagnostic tool for 
remote operation.

The M2 Scope/Meter only needs to be paired once before it’s initial use. The connection 
configuration should remain in memory for all future uses. If the connection configuration is 
removed or lost the pairing procedure will need to be repeated. 

Before pairing, make sure the M2 Scope/Meter and the diagnostic tool have fully charged 
batteries, or are connected to their AC/DC power supplies. It is highly recommended that both 
devices be powered by their respective AC/DC power supplies during the paring operation. The 
two devices to be paired should also be in close proximity to each other, and in an area that is 
relatively free of radio frequency interference.

NOTE:

i

The M2 Scope/Meter can only be paired with one diagnostic tool at a time. If the M2 Scope/Meter 
is paired to a diagnostic tool that is already paired with an M4 Scope Module, the M4 must be 
removed from its docking station or disconnected from USB prior to paring the M2. 

z

To pair the M2 Scope/Meter with the diagnostic tool:

1. Remove the M4 Scope Module from it’s docking station or disconnect it from the USB jack on 

the diagnostic tool.

2. Turn on the diagnostic tool and M2 Scope/Meter.
3. Set the M2 Scope/Meter 

Rotary Switch

 to the 

oscilloscope

 position.

4. Press and hold the 

F1

 key of the M2 Scope/Meter to open the alternate menu.

An alternate menu option for the F4 key is now displayed.

5. Press the 

F4

 key (once) to enable Bluetooth Discovery. Enabling Bluetooth Discovery allows 

the M2 Scope/Meter to be identified and paired to the diagnostic tool.
The F4 field on the screen switches to inverse video (white on black) when the Bluetooth 
Discovery mode becomes enabled (

Figure 14-2

).

Summary of Contents for VERUS edge

























































































































































































































Reviews:

No comments

Related manuals for VERUS edge

Ecco 10 Series Mounting Instructions preview
10 Series
Brand: Ecco Pages: 3
DARAY X200 Operating & Installation Manual preview
X200
Brand: DARAY Pages: 28
MacDon 3020 Operator'S Manual preview
3020
Brand: MacDon Pages: 88
Jiffy 56 Operating Manual/Parts Manual preview
56
Brand: Jiffy Pages: 15
Datalogic Heron HD3430 Quick Reference Manual preview
Heron HD3430
Brand: Datalogic Pages: 48
PageFlip Firefly Quick Start Manual preview
Firefly
Brand: PageFlip Pages: 32
h/p/cosmos 190/65 3p Original Instruction preview
190/65 3p
Brand: h/p/cosmos Pages: 81
MagCore Plus II Troubleshooting Manual preview
Plus II
Brand: MagCore Pages: 80
MagCore Plus II Service Manual preview
Plus II
Brand: MagCore Pages: 80
Vapotherm precision flow Operating Instructions Manual preview
precision flow
Brand: Vapotherm Pages: 32
Vanguard Instruments EZCT Operating Procedures Manual preview
EZCT
Brand: Vanguard Instruments Pages: 47
A.HABERKORN KS 45 Instructions For Use And Test Manual preview
KS 45
Brand: A.HABERKORN Pages: 28
Accurate Technology VALIANT Owner'S Manual preview
VALIANT
Brand: Accurate Technology Pages: 10
Gage Bilt GB924 Original Instructions Manual preview
GB924
Brand: Gage Bilt Pages: 28
VanGaa Lighting VG-LB1083 User Manual preview
VG-LB1083
Brand: VanGaa Lighting Pages: 7
Garmin GPSMAP 7400 Series Installation Instructions Manual preview
GPSMAP 7400 Series
Brand: Garmin Pages: 8
Ametek mocon AQUATRAN 3/38 Operator'S Manual preview
mocon AQUATRAN 3/38
Brand: Ametek Pages: 85
Ultratune SBT247 Owner'S Manual preview
SBT247
Brand: Ultratune Pages: 12

Brands by name

Popular brands

Load more brands