manualshive.com logo in svg

Snap-On VERUS edge, User Manual

The Snap-On VERUS Edge is an advanced automotive diagnostic tool that empowers mechanics with its cutting-edge features. Maximize your efficiency and performance with the accompanying User Manual - available for free download on our website. Explore its comprehensive instructions and unleash the true potential of the VERUS Edge!

Share
Download
background image

123

Chapter 10

Quick Lookups

This chapter describes the basic operation, and navigation of the 

Quick Lookups

 function. 

The 

Quick Lookups 

icon is located on the Home screen.

Quick Lookups includes the following vehicle information functions:

•

Oil Specs and Resets

•

TSBs (Technical Service Bulletins)

10.1   Oil Specs and Resets

This section describes the basic operation, and navigation of the Oil Specifications and Resets 
function.

Oil Specs and Resets provides up-to-date OEM information on your diagnostic tool, via wireless 
network connection with our Snap-on network. This feature allows you quickly access the 
following OEM information: 

•

Engine oil service reset procedures

•

Engine oil specifications 

In addition, you can perform engine oil service resets using the diagnostic tool (if supported).

NOTES:

i

 — Oil Specs and Resets coverage includes domestic and import cars, light trucks, and vans. 
      Coverage is limited to vehicles sold through dealerships only in the United States.

—  All vehicles may not have on-board diagnostic tool reset capabilities, or information 
      available.

—  To use the Oil Specs and Resets feature you MUST have the current software upgrade
      installed on your diagnostic tool.

—  If you experience a wireless network connection loss, the Oil Specs and Resets function
      may stop. To continue use, you must re-establish your Internet connection. 

Summary of Contents for VERUS edge

























































































































































































































Reviews:

No comments

Related manuals for VERUS edge

dbx 911 Instruction Manual preview
911
Brand: dbx Pages: 12
dbx QUANTUM Application Manual preview
QUANTUM
Brand: dbx Pages: 13
dbx 1066 Operation Manual preview
1066
Brand: dbx Pages: 72
dbx AFS224 Quick Start Manual preview
AFS224
Brand: dbx Pages: 11
dbx 566 Owner'S Manual preview
566
Brand: dbx Pages: 16
NEILPRYDE RS6 Manual preview
RS6
Brand: NEILPRYDE Pages: 55
HANYOUNGNUX STE Series Instruction Manual preview
STE Series
Brand: HANYOUNGNUX Pages: 4
Park House Healthcare WARWICK User Manual preview
WARWICK
Brand: Park House Healthcare Pages: 6
J&M TF2 Operator'S Manual preview
TF2
Brand: J&M Pages: 33
Fenton 178.388 Instruction Manual preview
178.388
Brand: Fenton Pages: 16
Handicare MiniLift160 Classic Service Manual preview
MiniLift160 Classic
Brand: Handicare Pages: 28
Hands Free Farm RANGER User Manual preview
RANGER
Brand: Hands Free Farm Pages: 24
i-Optik CV-7800 Operator'S Manual preview
CV-7800
Brand: i-Optik Pages: 75
ubicquia 3i Installation Manual preview
3i
Brand: ubicquia Pages: 4
Beurer FM 150 Instructions For Use Manual preview
FM 150
Brand: Beurer Pages: 21
SCHUNK PFH 30 Assembly And Operating Manual preview
PFH 30
Brand: SCHUNK Pages: 35
Sagitter ARROW 700 WASH User Manual preview
ARROW 700 WASH
Brand: Sagitter Pages: 12
Invacare TorqueTM 3 Parts Catalog preview
TorqueTM 3
Brand: Invacare Pages: 271

Brands by name

Popular brands

Load more brands