Snap-On VERUS edge, User Manual

Page: 107 / 216

97
Scope and Multimeter Operations Getting Started
The non-shielded red lead ( Figure 8-7 ) is used for either Channel 4 or Digital Meter plus (+). The
lead color matches the color of socket 4 on the Scope Module, as well as the color of trace 4 on
the test screen.
Alligator Clips
Figure 8-8
Alligator clip
Insulated alligator clips, colored to match each test lead, are included. A black clip for the common
ground lead is also supplied (
Figure 8-8 ). Each clip plugs into the straight end of a channel lead.
Test Probes
Figure 8-9
Test probe
Two test probes are included, one black and one red ( Figure 8-9 ). The test probes plug into the
straight end of the test leads.
Secondary Coil Adapter Lead (optional)
Figure 8-10
Secondary Coil Adapter lead
The optional Secondary Coil Adapter lead ( Figure 8-10 ) connects to the clip-on secondary wire
adapter, coil-in-cap adapter or coil-on-plug adapter to display secondary waveforms.
Secondary Ignition Clip-on Wire Adapter (optional)
Figure 8-11
Secondary Ignition Clip-on Wire Adapter