Snap-On Triton D8 User Manual Download

Page: 41 / 204

Scanner

Codes - View / Save

6.2.6 System Main Menu Options

Once a System (e.g. Engine, Transmission, Antilock Brakes, etc) is selected, the
available options for that system are displayed (

Figure 6-4

Figure 6-6

Typical Engine Systems List

NOTE

Menus and navigation will vary by vehicle.

The System Main Menu may include:

•

Codes Menu

—displays diagnostic trouble code (DTC) records from the

vehicle electronic control module. Selecting may open a submenu of viewing
options.

•

Clear Codes

—erases DTC records and other data from the ECM. This

selection is found on a Codes submenu for some models.

•

Data Display

— displays PID data from the vehicle electronic control module.

Selecting may open a submenu of viewing options.

•

Functional Tests

—provides specific subsystem tests. The tests vary

depending on the manufacturer and model.

•

Actuator Tests

—similar to functional tests, checks the operation of certain

actuators, such as solenoid valves and relays.

•

Memory Resets

—allows you to reprogram adaptive values for certain

components after making repairs. Selecting opens a submenu. These options
are found on the Functional Tests Menu for some models.

•

System Tests

—provides specific subsystem testing. Performing these tests is

similar to functional tests.

•

Generic Functions

—lets you access certain available Generic OBD II

functions from a proprietary menu (1996 and newer vehicles only).

•

Troubleshooter

—provides step-by-step procedures, integrating PIDs and

retrieving trouble codes when appropriate, for specific symptoms of the
identified vehicle.

The following sections, describe some of the System Main Menu items listed above.

6.3 Codes - View / Save

6.3.1 Codes Menu

After selecting a System, this selection “Codes Menu” may appear as a different
name (e.g Codes, Codes Menu, Codes Only, Codes (No Data), Service Codes) or
something similar depending on the vehicle manufacturer. Options may include:

•

Display Codes

•

Clear Codes

on page 32

•

Freeze Frame/Failure Records

on page 33

The following Code related control icons are used:

Icon

Function

Diagnose

- Opens

Intelligent Diagnostics

for the code selected (highlighted)

Save

- Saves the displayed code list results as an (.XML) file. See

Viewing

Codes and Code Scan Results

on page 136

Help

- The Help icon on the toolbar opens the Getting Started with Intelligent

Diagnostics slideshow. See

Getting Started (Demonstration)

on page 24

Summary of Contents for Triton D8













































































































































































































Search results

Summary of Contents for Triton D8

Reviews:

Related manuals for Triton D8

Brands by name

Popular brands

Snap-On Triton D8, User Manual

Search results

Summary of Contents for Triton D8

Reviews:

Related manuals for Triton D8

Brands by name

Popular brands