Snap-On Triton D8 User Manual Download Page 166

Page: 166 / 204

The Snap-on® Cloud

Using the Snap-on Cloud

156

16.3.3 Snap-on Cloud Setup Information Screen

From the Home screen, selecting

Tools > ALTUS Setup

allows you view

(

Figure 16-3

) the diagnostic tool serial number, PIN and Code needed to register.

NOTE

The PIN and Code numbers will change each time you view the Setup screens

(

Figure 16-3

and

Figure 16-1

This is normal, any displayed set of PIN and

Code numbers may be used to register.

Figure 16-3

16.4 Using the Snap-on Cloud

To use The Snap-on Cloud:

•

A Snap-on Cloud account is required, see

Registration - Getting Started

page 153

•

The diagnostic tool must be connected to a Wi-Fi network, see

Wi-Fi Connection

/ Troubleshooting

on page 147

16.4.1 Logging in to Snap-on Cloud (registered user)

Logging in to Snap-on Cloud (registered user):

Using your mobile device or PC visit

ALTUSDRIVE.com

Select the

Login

icon (

Figure 16-4

Figure 16-4

Summary of Contents for Triton D8













































































































































































































Search results

Summary of Contents for Triton D8

Reviews:

Snap-On Triton D8, User Manual, Page: 166 / 204

Search results

Summary of Contents for Triton D8

Reviews: