Scanner - Motorcycle
Features and Icons
45
A menu option may be displayed to choose either
Automatic ID
or
Manual ID
.
- Selecting
Automatic ID
(If supported) will briefly display a
communications screen informing you that the diagnostic tool is
attempting to establish communication and determine vehicle
identification.
Once the vehicle has been identified, the vehicle confirmation screen
displays. If the vehicle information is correct, select
OK
to continue, then
proceed to step 3.
If the vehicle does not support Auto ID, the diagnostic tool will attempt to
identify the vehicle and then display a message indicating that vehicle
identification cannot be made. If this occurs, proceed to “
Selecting
Manual ID
” next.
- Selecting
Manual ID
allows you to manually enter all the vehicle
information to identify the vehicle.
Follow the screen prompts to enter all the information required to identify
the vehicle. Once the vehicle has been identified, the vehicle
confirmation screen displays (
). If the vehicle information is
correct, select
OK
to continue, then proceed to step 3.
Figure 7-3
confirmation screen
After the motorcycle is identified, prompts will indicate to turn the motorcycle
ignition on and connect the data cable.
Depending on the motorcycle, a menu option to select a system list display
type may be provided (
).
Some motorcycles may support a “Fitted Systems” display type. In this
situation a menu option is provided to display the fitted systems or all systems.
Selecting Fitted Systems will only display systems that the diagnostic tool is
communicating with. Selecting All Systems will display every system possibly
supported.
Figure 7-4
