Snap-On Solus Legend User Manual Download Page 21

Page: 21 / 143

Data Cable Connections

Data Cable Connection (OBD-II/EOBD Vehicles)

NOTE

The supplied

9 ft. (2.7 m)

DA-4 data cable, includes an LED flashlight on the

vehicle DLC connector end (

Figure 4-3

). The LED flashlight is powered by the

diagnostic tool battery.

If needed, press the LED flashlight button switch on the end of the data cable
to turn the LED flashlight on (

Figure 4-3

), and locate the DLC.

Figure 4-3

DA-4 data cable LED flashlight

Connect the16-pin (J-1962) end of DA-4 cable (

Figure 4-4

) to the vehicle DLC.

Figure 4-4

DA-4 data cable (16-pin end) connection to vehicle DLC (typical DLC locations)

Select

Continue

once the data cable is connected.

The diagnostic tool establishes communication with the vehicle, then displays
a list of available tests, see

Scanner - Automotive

on page 19

for additional

information.

4.1.1 Optional OBD-II/EOBD Data Cable

A shorter 6 ft. (1.8 m) DA-4 OBD-II data cable is available as an option.

Contact your sales representative to purchase all optional accessories.

IMPORTANT

Only use original Snap-on data cables and accessories with your
diagnostic tool. Total data cable length must not exceed 114.17 inches

(2.9 meters).

DA-4

J-1962

Summary of Contents for Solus Legend
















































































































































Search results

Summary of Contents for Solus Legend

Reviews:

Snap-On Solus Legend, User Manual, Page: 21 / 143

Search results

Summary of Contents for Solus Legend

Reviews: