Snap-on Cloud
Using the Snap-on Cloud
95
14.3.3 Snap-on Cloud Setup Information Screen
From the Home screen, selecting
Tools > Get Connected
allows you view
) the diagnostic tool serial number, PIN and Code needed to register.
NOTE
The PIN and Code numbers will change each time you view the Snap-on
Cloud Get Connected screen
(
).
This is normal,
any displayed set of PIN and Code numbers may be used to register.
Figure 14-3
14.4 Using the Snap-on Cloud
To use the Snap-on Cloud:
•
A Snap-on Cloud account is required, see
Registration - Getting Started
.
•
The diagnostic tool must be connected to a Wi-Fi network, see
14.4.1 Quick Reference (print / download / share)
•
Downloading Files
- Select the menu icon on the file card (upper right), then
select
Download
from the menu options. See (callout #4) in
.
•
Printing Files
- Select the menu icon on the file card (upper right), then select
Download
from the menu options (see callout #4 in
), once
downloaded print the file from your device. Alternate Method - open the file in a
new browser tab (see
) and use the browser viewer
tools to print the file.
Note: All browsers may not support this feature
.
•
Sharing Individual Files
- Select the link icon on the file card (lower center),
then select
Copy to Clipboard
from the pop-up window. See
•
Sharing the Entire Gallery of Files
- Select the menu icon from the upper
toolbar (upper right), then select
Copy to Clipboard
from the pop-up window.
See