Snap-On MODIS User Manual Download

Page: 69 / 72

Downloading and Installing Software Updates

Downloading Service Upgrades

Figure B-12

Sample no updates available screen

b. If an upgrade is available, an updates found message displays (Figure B-13). Select

Download

to begin the upgrade process and continue to Step 6.

Figure B-13

Sample update available screen

NOTE:

Each service upgrade is unique. The time involved will vary and some additional steps may be
required. Follow any on-screen instructions to complete the process.

When the “complete” message displays, select

Finish

to close the Update Manager.

10. Remove the USB cable to disconnect the tool from the PC.

11. Press and hold the

Power

button on MODIS to exit Connect to PC mode.

The upgrade is now downloaded, but not installed. The installation process automatically
begins when MODIS is powered on.

12. Press the MODIS

Power

button to boot the tool and begin the upgrade installation. The install

may take several minutes and a series of screens tracks the progress. Do not press any
buttons or disrupt power during the installation.

When the main menu displays, the upgrade installation is complete and your MODIS unit is
ready for use.

Summary of Contents for MODIS









































































Search results

Summary of Contents for MODIS

Reviews:

Related manuals for MODIS

Brands by name

Popular brands

Snap-On MODIS, User Manual

Search results

Summary of Contents for MODIS

Reviews:

Related manuals for MODIS

Brands by name

Popular brands