ZECKOROLL
REV ‘A’
OCT 2018
14
8
Remote Pairing
ECKO remotes come from the factory already
paired to the ECKO receiver module. This proce-
dure will only be necessary if your remote has lost
pairing.
Follow these steps to pair the remote(s) with your
TSU:
1. Open top drawer of the TSU and locate the
ECKO receiver module.
2. Hold down the learn button on the module until
it starts to beep. The unit will beep for 1 second.
Release the learn button.
3. After beeping has stopped, pair remote by
pressing and holding the lock or unlock button
on the remote for approximately 3 seconds. The
receiver module will beep once to confirm pairing
was successful.
NOTE:
If pairing multiple remotes, press and
holdthe lock button on each remote within the 10
second learn period. The module will end the pair-
ing time period once the second remote is paired.
Only two remotes can be paired to one TSU.
4. After 10 seconds, the receiver module will
beep twice to signify that the pairing time peri-
od is over.
*Module view behind front dress plate
Learn/Volume Button
Learn/Volume Button
AC/DC Adapter Plug
Resetting Remote Lock Receiver Module
Follow these steps to reset the ECKO remote lock re-
ceiver module:
1. Open top drawer of the TSU and locate the receiv-
er module.
2. Reset module by removing power cord from the
AC/DC adapter plug. Once removed, wait 5 seconds
before reinstalling power cord
*Module view behind front dress plate
Note: If you are unable to reset module with the switch
due to the drawers being locked, unplug TSU from AC/
DC adapter and plug back in after 5 seconds.
Note: The remote(s) will not need to be re-paired to the
receiver module after resetting.
Speaker Volume Adjustment
Follow these steps adjust the volume of your ECKO re-
mote lock receiver module:
1. Open top drawer of the TSU and locate the receiv-
er module.
2. Press the volume two times to change volume of
speaker.
3. Receiver will beep to confirm volume change.
• 1 Beep – Low Volume
• 2 Beeps – High Volume
• 3 Beeps – Volume Off
