91
Scope Multimeter Operations
Operations
Data
The Data button on the toolbar switches the trace details information at the base of the screen
through three states as previously explained in
Cursor Controls
Select Cursors from the toolbar to open the Cursors dialog box (
).
1— Cursor 1 controls
2— Cursor 2 controls
3— Show or Hide button
4— Back button
Figure 8-31 Cursor controls
Cursor 1, the top slider and arrows, is the left-hand cursor on the screen. Cursor 2, the lower set
of controls, is the right-hand cursor on the screen. Drag the slider or tap the arrows to position the
cursors. Each tap of the stylus moves the cursor incrementally in the direction of the arrow.
Select Show to display the cursors (the button changes to Hide).
Select Hide to conceal the cursors (the button changes to Show).
Select Back to close the dialog box.
Refresh Controls
Selecting the Refresh button from the Scope Multimeter Toolbar clears the minimum and
maximum digital values and updates the viewing screen.
File Controls
Selecting File from the toolbar opens a dialog box with a menu of save options:
•
Save Configuration—saves the current setup values as a preset.
•
Save Single Frame—saves the data currently on the screen only.
•
Save All Frames—saves the current screen plus all the data stored in the buffer.
