manualshive.com logo in svg

Snap-On 642672, Instruction Manual

Share
Download
Snap-On 642672 Instruction Manual Download Page 3

INTRODUCTION

This instruction manual is intended for your benefit. Please read and follow the safe-
ty, installation, maintenance and troubleshooting steps described within to ensure
your safety and satisfaction. The contents of this instruction manual are based upon
the latest product information available at the time of publication. The manufactur-
er reserves the right to make product changes at any time without notice.

GENERAL SAFETY

READ AND FOLLOW ALL INSTRUCTIONS.

Failure to follow all instructions in this manual may result in severe 
personal injury or death. Keep this manual and refer to it for Safety
Instructions, Operating Procedures, and Warranty.

SAVE THESE INSTRUCTIONS FOR 

FUTURE REFERENCE.

RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS

The safety instructions provided in this manual are not intended to cover all possible
conditions and practices that may occur when operating, maintaining and cleaning
power tools.

Always use common sense and pay particular attention to all the 

DANGER

, 

WARNING

, 

CAUTION

and 

NOTE

statements in this manual.

This is the safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid
possible injury or death.

DANGER

indicates an imminently hazardous 

situation which, if not avoided, will result in death
or serious injury.

WARNING

indicates a potentially hazardous 

situation which, if not avoided, could result in
death or serious injury.

2

Summary of Contents for 642672






























Reviews:

No comments

Brands by name

Popular brands

Load more brands