17
Removing and emptying the grass catcher
Working without the grass catcher
TIPS ON LAWN CARE
MAINTENANCE
Cleaning
Lawn mower
Switching off
Release the On-/Off-switch(2).
After release the On/Off switch, the cutter bar continues running briefly. Risk of injury!
When working without the grass catcher, the mowed grass is ejected directly downwards.
Here are some tips to help you keep your lawn looking healthy and ensure uniform growth:
Lawns consist of various grass types. Frequent mowing promotes the growth of grass,
resulting in strong roots and a firm sward. If you seldom cut the grass, you will enhance the
development of high-growing types of grass and other weeds, such as clover, daisies.
The normal height of a lawn is approx. 4–5 cm. Only one third of the total height should be
mow; therefore cut 7–8 cm long grass to normal height.
Before performing any maintenance and cleaning work on the garden tool, remove the battery.
Sharp cutting tool! Wear protective gloves.
Do not use water or liquid detergents.
Whenever possible, always clean the unit directly after mowing.
Remove the battery.
If the grass catcher bag is full and should be emptied immediately.
1. Switch the motor off.
2. Wait until the cutter bar stops.
3. Lift the discharge flap.
4. Remove the grass catcher.
5. Lower the discharge flap down again.
6. Empty the grass catcher.
7. Before hooking, remove any obstructions from the cutting area.
WARNING!
WARNING!
WARNING!
•
•
•
