Snap Fresh BBT-JOZ57C, User Manual

Page: 6 / 16

ADDITIONAL SAFETY WARNINGS FOR DRILLS AND SCREW DRIVERS
•
•
Wear ear protectors when impact drilling. Noise exposure can cause hearing loss.
•
Hold the power tool by insulated gripping surfaces, when performing an operation where the
cutting accessory may contact hidden wiring. Cutting accessory contacting a “live” wire may make
exposed metal parts of the power tool “live” and could give the operator an electric shock.
•
Brace the tool properly before use This tool produces a high output torque and without properly
bracing the tool during operation, loss of control may occur resulting in personal injury.
SAFETY INSTRUCTIONS WHEN USING LONG DRILL BITS.
•
Never operate at higher speed than the maximum speed rating of the drill bit. At higher speeds,
the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in
personal injury.
• Always start drilling at low speed and with the bit tip in contact with the workpiece. At higher
speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece,
resulting in personal injury.
• Apply pressure only in direct line with the bit and do not apply excessive pressure. Bits can bend
causing breakage or lose of control, resulting in personal injury.
6
.
Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
.
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or
temperature above 130 °C may cause an explosion. NOTE The temperature „130 °C“ can be replaced by
the temperature „265 °F“.
.
Follow all charging instructions and do not charge the battery pack or tool outside the temperature
range specified in the instructions. Charging improperly or at temperatures outside the specified
range may damage the battery and increase the risk of fire.
6) Service
Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
• Never service damaged battery packs. Service of battery packs should only be performed by the
manufacturer or authorized service providers.
•
•
SAFETY WARNINGS FOR BATTERY
Do not open the battery. Danger of shortcircuiting.
Protect the battery against heat, e. g., against continuous intense sunlight, fire, water, and moisture.
Danger of explosion.
•
•
•
In case of damage and improper use of the battery, vapors may be emitted. Ventilate the area
and seek medical help in case of complaints. The vapors can irritate the respiratory system.
Use the battery only in conjunction with your SnapFresh product. This measure alone protects the
battery against dangerous overload.
The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied
externally. An internal short circuit can occur and the battery can burn, smoke, explode or overheat.
Drill safety warnings