3
Setup and Operation
1. Place the heating wrap on the shoulder and lock the magnetic button at the arm straps.
2. Lock the buckles at the ends of the elastic bands.
2. Connect the adapter cable to the corresponding cable on the heating wrap.
Note:
3. Plug the home adapter into an electric outlet.
4. Turn on the device by operating control panel (refer to controller instructions.).
5. When finished unplug the adapter from the outlet.
•
The device will automatically switch off after 30 minutes timer run out.
•
Do not setup or use the device in a bathroom or similary wet/damp areas.
•
Ensure the device is not exposed to direct sunlight or placed near sources of heat.
This product produces a warming heat. It is not intended to be used as a therapeutic
heating pad. Please allow a few minutes to reach maximum temperature.
The maximum temperature: approx 130F.
Controller instructions
Power:
Press to turn the
device on or off.
Heat:
Press to activate the
heat function, you may
cycle through High, Low
and off settings.
The heat can be turned
on independently.
Vibration massage:
Press to change the mode
between Mode 1 to
Mode 5. The vibration
massage can be turned
on independently.
