SNAIGE RF59FB-TN00NE0, User Manual

Page: 18 / 32

17
WARNING: Do not damage the appliance refrigeration system. It
contains the refrigerant gas R600a. If the refrigeration system is
damaged:
•
Do not use any open flame.
•
Avoid sparks-do not turn on any electrical appliances or lighting fixtures.
•
Immediately ventilate the room: air the room in which the appliance is placed
for a few minutes (the size of the room for a product containing isobuthane /
R600a must be at least 4 m
3
) to avoid damage to the cooling system.
C-Pentane is used as blowing agent in theinsulation foam and it is a
flammable gas.
–
The appliance should be used only for freezing and storing foodstuffs.
–
This appliance is not designed for the storage of explosive substances such as
aerosol cans with a flammable propellant.
–
It is prohibited to store petrol and other flammable liquids near the appliance.
Children and vulnerable people safety:
–
Do not allow children to play with the appliance or to plug it in or unplug from
the electricity supply socket. Do not allow children to play with the packaging
material from the appliance. Cleaning and user maintenance shall not be made
by children without supervision
–
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children aged from 3 to 8 years are allowed to load and unload
refrigerating appliances.
Requirements for the connection to the mains:
–
The appliance should only be connected to an earthed socket installed in
accordance with the regulations. Make sure that the supply voltage
corresponds with the voltage marked on the rating label. This product complies
with all binding CE labelling directives. The earthed electrical socket by which
the appliance is connected to the mains should be in an accessible place. The
appliance mustbe earthed in conformity with national electricalsafety
standards. The manufacturer will not be held liable for any damage or injury
which may result from the failure to fulfil this requirement.