6
•
Once the unit has been positioned, wait for about 30 minutes before it is connected to
the mains.
If the unit has been tilted more than 30° during transport:
wait at
least 4 hours before connecting the appliance to the power supply.
If this
is not done, the appliance compressor may fail.
•
When first starting-up or after a period out of use, before putting the products in the
compartment let the appliance run at least 2 hours.
DESCRIPTION OF THE APPLIANCE, BASIC PARTS
The appliance accessories listed below may differ from the accessories of the
appliance you have bought in quantity and in design. This description is adapted for
entire group of two–compartment refrigerator-freezer combinations.
A – refrigerator compartment
B – freezer compartment
The transparent cold section 0 °C Fresh
ZONE drawer 5 moves on roller bearings
22. The drawer can be removed by pulling
it out, and lifting it off the rails.
1 Temperature controller / thermostat
9 Fast-freeze section
2 Interior lighting on / off button
10 Frozen products section(s)
