8
FREEZER COMPARTMENT should be thawed not less than twice a year or when a layer of
ice thicker than 4 mm forms in it. Do the actions below in the order they are listed:
WARNING! Turn the appliance off and pull the plug out of the electrical socket.
•
Remove foodstuffs from freezer compartment. The frozen foodstuffs will not warm up
too much while you are thawing the freezer compartment if you cover them with a thick
cloth and keep them in a cool place.
•
Leave freezer compartment door open. Leave door of appliance open. When the ice
melts, clean and wipe dry the surfaces and fixtures of the refrigerator and freezer
compartments.
•
Close the appliance door. Plug in and turn on the appliance.
REGULARLY CLEAN THE APPLIANCE.
Remember that before defrosting the appliance and cleaning the back
part of the appliance body you must disconnect the appliance from the
electrical energy supply socket by pulling the plug out of the electricity
outlet.
•
Protect the appliance inner surfaces and plastic parts from fats, acids and sauces. In
case of accidental spills – immediately clean with warm soapy water or dishwashing
detergent. Wipe dry.
•
Regularly clean the hermetic gaskets of the doors. Wipe dry.
•
Regularly clean the thaw water channel space in the refrigerator
with a special cleaner for that purpose (see fig.).
•
At least once a year clean dust away from the back part of the
appliance body and the compressor. A soft brush, electrostatic
cloth or vacuum cleaner may be used for cleaning.
•
DO NOT use detergents containing abrasive particles, acid, alcohol
or benzene for cleaning the appliance inner and outer surfaces. DO
NOT use for cleaning cloths or sponges that have coarse surfaces
intended for scrubbing.
•
If the appliance is to be left switched off for an extended period,
leave its doors open.
CHANGING THE INTERIOR LIGHT BULB
When changing the interior light bulb (fig. 6), do the actions below in the order they are
listed:
Unplug the appliance from the mains by pulling the plug out of the electricity
supply socket.
1.
Push the interior light bulb lid 4 retainer 5 with a flat screwdriver and with your other
hand pull it toward yourself.
2.
When you have changed the light bulb, replace the lid and push — the lid will snap into
position.
3.
Plug the appliance into the electricity supply socket.