SMSC USB2512Ai
DATASHEET
Revision 1.97 (08-11-08)
Datasheet
PRODUCT FEATURES
USB2512Ai
Industrial Temperature Rated
USB 2.0 Hi-Speed 2-Port Hub
Controller
General Description
T h e S M S C 2 - P o r t H u b i s a l o w p o w e r, O E M
configurable, STT (single transaction translator) Hub
controller IC with 2 downstream ports for embedded
USB solutions. The 2-port Hub is fully compliant with
the USB 2.0 Specification and will attach to an upstream
port as a Full-Speed Hub or as a Full-/Hi-Speed Hub.
The 2-Port Hub supports Low-Speed, Full-Speed, and
Hi-Speed (if operating as a Hi-Speed Hub) downstream
devices on all of the enabled downstream ports.
General Features
Hub Controller IC with 2 downstream ports
Enhanced OEM configuration options available
through either a single serial I
2
C EEPROM, or
SMBus Slave Port
36-pin (6x6mm) QFN lead-free RoHS compliant
package
Supports industrial temperature range of -40ºC to
85ºC
Hardware Features
Low power operation
Full power management with individual or ganged
power control of each downstream port
On-chip Power-On Reset (POR)
Internal 1.8V Voltage Regulator
Fully integrated USB termination and Pull-up/Pull-
down resistors
On Board 24MHz Crystal Driver, Resonator, or
External 24MHz clock input
Enhanced EMI rejection and ESD protection
performance
OEM Selectable Features
Customizable Vendor ID, Product ID, and Device ID
Select whether the Hub is part of a compound device:
When any downstream port is permanently hardwired
to a USB peripheral device, the Hub is part of a
compound device
Flexible port mapping and disable sequence: Ports
can be disabled or reordered in any order to support
multiple product SKUs. The Hub will automatically
reorder the remaining ports to match the Host
controller's numbering scheme.
Programmable USB differential-pair pin location:
Ease PCB layout by aligning USB signal lines directly
to connectors
Programmable USB signal drive strength: Recover
USB signal integrity due to compromised system
environment using 2-level driving strength resolution
Select the presence of a permanently hardwired USB
peripheral device on a port-by-port basis
Configure the delay time for filtering the over-current
sense inputs
Configure the delay time for turning on downstream
port power
Indicate the maximum current that the 2-port Hub
consumes from the USB upstream port
Indicate the maximum current required for the Hub
controller
Pin Selectable Option for Default Configuration:
Select Downstream Ports as Non-Removable Ports
Applications
LCD monitors and TVs
Multi-function USB peripherals
PC motherboards
Set-top boxes, DVD players, DVR/PVR
Printers and scanners
PC media drive bay
Portable Hub boxes
Mobile PC docking
Embedded systems
