
➂
Insert and tighten screws (provided) appropriate for projector mounting
holes.
Please Note:
Do not overtighten screws into projector. If screw is hitting the
end of the threaded hole, add more washers at the top of the screw.
➃
Adjust the centerpiece so that it is above the projector’s center of gravity,
and tighten centerpiece. To determine the projector's center of gravity,
place a small level on the projector. Hold the projector by the top of the
bracket nut and make sure the projector hangs level. Adjust the Univer-
sal Projector Bracket by sliding the centerpiece along the arms until the
projector hangs level, then tighten the centerpiece.
➄
Tighten lower locking nut.
➅
Place the mount ball joint into the slot in the nut.
➉
Adjust height and tighten setscrews.
➆
Tighten the nut.
➇
Tighten the upper locking nut.
➈
Rotate projector into position.
Summary of Contents for CL V
Page 1: ......