www.smoothfitness.com
17
ASSEMBLY
STEP 5
:
Attach the Fan and Handlebar Covers
(A) Place the fan cover #133 in-between the #132A and #132B covers (See Fig.5A).
(B) Attach wire 3 and 4 from the upright post to the fan board and then wire 2 from
the upright post to wire 2 from the fan board. Now attach wire 8 from the hand rail
assembly to wire 8 from the fan board. (See Fig. 5B)
(C) Take the # 7 fan wire and route it with the other wires from the handrail assembly
(D) Secure the fan cover #133 by using 4 x #136 screws.
(E) Attach the Handlebar cover #134 and secure it using 2 x #136 screws.
(F) Fully tighten all screws for covers #133, #134, #132A and 132B (See Fig.5C)
(G) Place the two long connecting bars on to the swinging axel plate #101 and the
opposite end on the stride adjuster. Be certain that the Long connection bar is
facing the correct direction (See Fig. 5D)
(H) Secure both long connecting bars to the swinging axel plates #101 by using 2x
#18 Allen head bolts, 2x #39 M8 Washer.
(I) Completely tighten the #18 bolts and insert the plastic cap
(J) Secure the long connecting bars to the stride adjuster by using 2 x #138 large
bolts. (See Fig. 5E)
(K)
Completely tighten the large bolts and cover with 2 x #137 protective cap
#136
6
#18
2
#39
2
#46
2
#137
2
#138
2
Fig. 5D
Fig.5A
Fig.5C
2
3
4
7
Fig.5B
8
Fig. 5E
See page 25 for additional information
