background image

 Important Safety Instructions

WARNING!

Read all instructions before using this appliance.

DANGER 

- To reduce the risk of electric shock disconnect your treadmill from the

electrical outlet prior to cleaning and/or service work.

WARNING -

 To reduce the risk of burns, fire, electric shock, or injury to persons,

install the treadmill on a flat level surface with access to a 120-volt, 20-amp
grounded outlet.  DO NOT USE AN EXTENSION CORD:  DO NOT ATTEMPT TO
DISABLE THE GROUNDED PLUG BY USING IMPROPER ADAPTERS, OR IN ANY
WAY MODIFY THE CORD SET.  A serious shock or fire hazard may result along
with computer malfunctions.  See Grounding Instructions, page 2.

Do not operate treadmill on deeply padded, plush or shag carpet.  Damage to both

carpet and treadmill may result.

Do not block the rear of the treadmill.  Provide a minimum of 3 1/2 feet clearance

between the rear of the treadmill and any fixed object.

Keep children away from the treadmill.  There are obvious pinch points and other

caution areas that can cause harm.

Keep hands away from all moving parts.

Never operate the treadmill if it has a damaged cord or plug.  If it is not working

properly, call your dealer.

Keep the cord away from heated surfaces.

Do not operate where aerosol spray products are being used or where oxygen is

being administered.

Never operate the treadmill with the air openings blocked.  Keep the air openings

free of lint, hair, and the like.

Never drop or insert any object into any openings.

Do not use outdoors.

To disconnect, turn all controls to the off position, remove tether cord, then remove

plug from outlet.

Do not attempt to use your treadmill for any purpose other than for the purpose it is

intended.

Use handrails provided; they are for your safety.

Wear proper shoes.  High heels, dress shoes, sandals or bare feet are not suitable

to be used on your treadmill.  Quality athletic shoes are recommended to avoid leg
fatigue.

Remove tether cord after use to prevent unauthorized treadmill operation.

SAVE THESE INSTRUCTIONS - THINK SAFETY!

1

Summary of Contents for 9.6P

















Reviews: