Proffsmagasinet
• Localising mode
To change to the
localising mode
, briefly press the Select button
once
.
The optical display
in the upper display field is activated (see illustration on right). The lower
green LED is illuminated constantly,
the upper red LED comes on when an electric field is present.
In localising mode
, hidden electrical cables, junction boxes and similar items can be
localised. A cable carrying 230 V mains can be detected from a distance of
about 20 cm.
• Hold mode
To change to the
Hold mode
press the Select button
once and hold for several seconds
.
The last display flashes and is then frozen. The
Hold mode
is helpful for measurements
where it is difficult to view the display, e.g. when taking readings under
a bed or desk or behind furniture.
Please note that the Hold mode is not available in location mode.
Switching the unit off:
To switch off the esi 24 press the on/off button once
briefly
.
You can switch the unit off in any mode.
• Battery monitoring
The esi 24 electrosmog indicator features automatic battery monitoring. When the battery is low the red LED from
the location mode flashes several times and the unit switches off automatically. Reliable display of field strengths
can no longer be guaranteed until the battery is changed. Do not throw away the used battery;
it may still have some life available for other uses (e.g. in a remote control unit or similar).
• TECHNICAL DATA
Frequency ranges:
Summary of Contents for esi 24
Page 7: ...Proffsmagasinet...