Page 0
the power switch located at the bottom of the mouse
to “on” position. When the power is switched on,
the green LED lights up for about 2 seconds to
indicate the mouse is powered on.
Plug the USB receiver dongle to the computer’s
USB port if it’s not already plugged in. The
mouse is functional and ready to work. Note: if
your mouse comes with the matching keyboard
as a combo set, there is only one receiver dongle
shared by both keyboard and mouse. If the mouse
is part of a 3-device combo set with keyboard and a
PowerPoint presenter, the dongle is shared among
all 3 devices.
The radio frequency (RF) codes of the mouse must
be paired up with the receiver before the mouse
can be used. This step has been done for you at our
factory. However, if anytime you need to reconnect
your mouse to the receiver dongle, please perform
the following steps to establish the link:
Make sure the mouse is powered on.
Plug the mini USB connector of the USB
adapter (included in the box) to the mini
USB port on the mouse.
Connect the RF USB receiver dongle to the
USB adapter while the adapter is plugged
in to the mouse; the RF indicator light on
the mouse turns green. Leave it connected
for approximately 3 seconds until the RF
indicator light turns off; this is the indication
that the RF is successfully connected.
•
•
•
•
•
