Page
Operating Tips & Troubleshoot
• Check the on/off switch located at the bottom of the mouse
to make sure the mouse is powered on before using it.
• Conserve the battery power by switching the on/off switch to
“off” position while traveling or if the mouse will not be in use
for awhile. If you will not use the mouse for a long period of
time remove the batteries from the battery compartment.
• During operation the mouse will go into sleep mode after
8 minutes of inactivity to save battery power. Move the
mouse or click on any mouse button to wake it up.
• If the mouse cursor behaves erratically, first check if the operating range
is within 33-ft (10 meters). If it’s within range and the normal cursor
movement is not resumed, replace with a fresh set of 2 AAA batteries.
• The mouse stays connected to your Bluetooth-enabled computer
even when it’s turned off and out of range once it’s set up. If for any
reason the connection to the system is lost, first check if the Bluetooth
mouse icon is still displayed in My Bluetooth Places and verify that the
Bluetooth computer is within the range (up to 30 feet). If the connection
is lost it can be fixed by following the instructions in the Setting up
Bluetooth Connection section above to reconnect the devices.
• If the connection is frequently lost under normal operation,
contact your system vendor’s technical support or check for
Bluetooth stack update on your system vendor’s website.
