44121045.doc Page 2 of 6
C.
Time Display
There are two different kinds of time displays:
1.
12-hour display: the digital number is from 11:59 to 12:00 with AM or PM shown on the LCD
2.
24-hour display: the digital number is from 00:00 to 23:59, no AM or PM is shown on the LCD
3.
To change from 12-hour display to 24-hour display, or vice versa, press CLOCK Button and
hold it till the LCD display changes. Press CLOCK Button again to return to original display.
D.
Week & Time Setting
1.
Week Setting
1.1
Press and hold the SET Button until the week display flashes, which indicates setting is ready
1.2
Press
▲
+
Button to increase the day, or
▼－
Button to reduce the day, the sequence of the
display is shown as follows:
Mo
Tu
We
Th
Fr
Sa
Su
1.3
Press
▲
+
/
▼－
Button once will increase or reduce the day by sequence slowly. To press and
hold the button, the week display moves quickly. Release the button until your desired day of
the week shown on the display. Press SET Button to confirm your setting.
2.
Time Setting
2.1
After setting the day of the week, hour display flashes to indicate setting time can be started
2.2
Press
▲
+Button to increase number of hour, or
▼－
Button to reduce.
2.3
Press
▲
+
/
▼－
Button once will increase or reduce each hour slowly. To press and hold the button,
the hour display moves quickly. Release the button until your desired hour shown on the
display. Press SET Button to confirm your setting.
2.4
“Minute” display then flashes to indicate setting minute is ready. Repeat the same procedures in
setting hour as in #2.2 and #2.3 to set minutes.
3.
Summer Time Setting
3.1. Press CLOCK Button and
▼－
Button at the same time to change to summer time, time display
automatically adds one hour and “S” is shown on the LCD.
3.2. By pressing Clock Button and
▼－
Button again to cancel the summer time setting.
Noted:
LCD must be in real time display to start week and time setting. If LCD is in program setting
display, press CLOCK Button once to return to real time display.
E.
Program Setting
1.
When the LCD is in real time display, press
▲
+
Button once to change to program setting
display, “1ON” will be shown on the lower left corner of the LCD:
1.1
“1” indicates the program group’s number (program group is from 1 to 14)
