3
Hardshell Overland Tent
Part # 2983
Step 1.
Install the square
head carriage bolts into
the access holes on the
tent base. Do this for both
sides of the tent base, 4
bolts will be used per side.
Position bolts so there is
one bolt on each side of
the cross bar that it will be
mounted to. Fig 1.
Step 2.
Secure to cross
bar using the mounting
strap by placing it under
the crossbar and secure
using flat washers and
nylock nuts. Tighten
hardware evenly, do not
over tighten. Fig 2.
Step 3.
Periodically check
torque of mounting
hardware. Hardware will
slightly loosen over the
first few hundred mile as
the tent base conforms to
the crossbars.
Mounting Tent to cross bars
Periodically check torque
of all hardware.
Fig 1
Fig 2
