Issue 001 - January 2018 | SmithsEP.co.uk | 03
Important safety and installation instructions
Prior to installation, read these installation and operating instructions. The installation and operation should
also be in accordance with national regulations and accepted codes of good practice.
This product is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the product by a person
responsible for their safety. Children should be supervised to ensure that they do not play
with the product.
To guard against injury, basic safety precautions should be observed, including the
following:
1. Read and follow all safety instructions and all the important notices on the product
before installing, using and maintaining the product. Failure to do so may cause
personal injury or damage to the product or installation.
2. Risk of scalding. To avoid injury before any servicing operation wait until the water has
cooled inside the product. Do not touch the fluid or the product when temperature
is higher than 60°C.
3. Improper use.
This is an product to be used in heating systems with clean water without
abrasive particles.
4. Installation.
The product must be mounted in a stable/fixed position in a dry, frost-free and
waterproof place, with sufficient ventilation around it. Make sure that the product is
securely and correctly installed before operating it and that there is enough room
around it for maintenance operations, dismantling, checking for free inspection.
Non-observance of the safety instructions results in the loss of any claims to damages.
The indicated limit values are binding and cannot be exceeded for any reason whatsoever.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
