or replace the gas leakage part or joint.
- Retest after fixing the fault. Turn OFF the gas at the cylinder after testing.
LIGHTING THE APPLIANCE
1.
Open the lid and make sure the knob is in the OFF position.
2.
Push down the knob and turn the knob anticlockwise to HIGH position, then the burner is lit. If the burner is
not lit, turn off the knob and wait for at least 30 seconds then repeat this process.
3.
Adjust the heat by turning the knob to the High /Low position.
4.
To turn the barbecue OFF, turn off the cylinder valve first
then turn the control knob anticlockwise to “OFF”
position.
FOR MATCH LIGHTING
1. Open the lid and make sure the knob is on the OFF position.
2. place a match into match holder chain and fire the match, then put the match into the burner then push down the
knob and turn the knob anticlockwise to HIGH
position.
CLEAN AND MAINTENANCE
All cleaning and maintenance should be carried out when the appliance is cool and with the fuel supply turned
OFF
at
the gas cylinder after each time use.
DO NOT
mistake brown or black accumulation of grease and smoke for paint. Interiors of gas bbqs are not painted at
the factory (and should NEVER be painted). Apply a strong solution of detergent and water or use a bbq
cleaner with scrub brush on insides of grill lid and bottom. Rinse and allow to completely air dry.
DO NOT
apply a caustic bbq / oven cleaner to painted surfaces.
DO NOT
use abrasive or flammable cleaners, as it will damage the parts of the product and may start a fire.
Plastic parts
:
wash with warm soapy water and wipe dry.
Stainless steel surfaces
: Stainless steel would get rust if not maintain well. To maintain your bbq
’s high quality
appearance, wash with mild detergent and warm soapy water and wipe dry with a soft nonabrasive cloth after each
use. Use stainless steel protection liquid like Hillmark Stainless Steel cleaner or WD-40 on the surface to avoid rust.
Cooking grid
:
Use a mild soapy water solution. Non-abrasive scouring power can be used on stubborn stains then
rinse with water.
Pizza Stone
:
Use water to clean after the pizza stone is cool down
