Find your local contact information at: www.smiths-medical.com/customer-support
Smiths Medical is part of the global technology business Smiths Group plc. Please see the
Instructions for Use/Operator’s Manual for a complete listing of the indications, contraindications,
warnings and precautions. Graseby and the Smiths Medical design mark are trademarks of
Smiths Medical. The symbol ® indicates the trademark is registered in the U.S. Patent and
Trademark Office and certain other countries. All other names and marks mentioned are the
trademarks or service marks of their respective owners. ©2020 Smiths Medical.
All rights reserved. IS0208.GB.UK.Rev.A.0420
Alarms
Tips/reason
Operation
Occlusion Downstream blockage
Close roller clamp and press & hold
Audio Pause/Alarm reset key for 2
seconds to clear the alarm. After the
occlusion is eliminated, open the roller
clamp and press the Start key
Air in line Air detected
Press and hold the Audio Pause/Alarm
reset key for 2 seconds to clear
the alarm. Disconnect from patient
and remove the air from tubing or load
the tubing correctly to clear the alarm.
Press Start key
Battery
low
The battery capacity is
low
Press the Mute key , connect the
pump to an AC power supply as soon
as possible
Battery
over
The battery capacity is
empty, the infusion pump
has stopped
Connect the infusion pump to an AC
power supply immediately
Inf.
Ending
The infusion is
about to complete
in 3 minutes
Press the Audio Pause/Alarm reset
and the alarm will be muted for 2
minutes
Inf. Comp
The infusion is
completed, the
pump will operate
in the KVO rate
Press the Audio Pause/Alarm reset
and the alarm or press the Stop key
to stop the infusion
No
Operation
Indicates the pump
has been left idle for 2
minutes
Press any key to silence the alarm
and start the infusion or turn off the
infusion pump
Door
Open
If the lock handle is
open during infusion or
closed incompletely when
the pump starts, it will
trigger an audible and
visual alarm. At the same
time, the pump stops
running or the infusion
cannot be started
The alarm can be cleared by closing
the lock handle. Start key to
continue infusion
Priming
Stuck
Priming volume has
reached 6 mL
Release the Priming /Bolus key
PRIMING
/TUBING
to clear alarm
Graseby
™
1200
Large Volume Infusion Pump
Quick Reference Guide
PRODUCT(S) DESCRIBED MAY NOT BE LICENSED OR AVAILABLE FOR SALE IN ALL GEOGRAPHIES
Infusion tubing brand
Infusion status indicator
Main screen
Time display
Battery indicator
Pressure Indicator
Audio pause/
Alarm reset key
Alarm indicator
Stop key
Start key
Power key
External power
indicator
Select key
Priming/Bolus
key
Barrel clamp
Pump door
Move cursor key
Shift cursor key
Digit setting key (Up)
Digit setting key (Down)
Door bolt
Infusion
direction
Pressure
sensor
Fluid clamp
Ultrasonic
sensor
Dynamic box
Drag hook
Lock handle
Read the entire Instruction Manual before operating the Graseby™
1200 Infusion Pump . Failure to properly follow warnings, cautions and
instructions could result in death or serious injury to the patient.
The Graseby™ 1200 is a volumetric infusion pump that provides accurate
and reliable infusions at a rate of 1 - 1200 mL/h
IS0208.GB.UK.Rev.A.0420.indd 1
IS0208.GB.UK.Rev.A.0420.indd 1
23/04/2020 11:03
23/04/2020 11:03
